Operating instructions

The “Percent Weighing” application

109

9.4.3 Example of a percent weighing report

Shown at left is an example of a report for a percent weighing with target value and toler-

ances. The values which are reported in the header line, as individual values, and in the

footer line depend on your individual report settings (section 9.3.5).

Only those information items shown in the report which specifically relate to percent

weighing are explained below. You will ﬁnd explanations of the other items in section

5.2.8).

“Reference%”: Reference value in percent.

“Reference”: Absolute weight value of the reference.

“Target value”: Speciﬁed target value (in this example, in the unit %).

“+Tol”: Speciﬁed plus tolerance (in this example, in the unit %).

“–Tol”: Speciﬁed minus tolerance (in this example, in the unit %).

“129.06”: Result of the weighing as % of the reference.

“Diff.%”: Percentage deviation of the result from the target value.

---- Percentweighing ---

28.Feb 2005 13:28

User Name User 5

Reference% 100.00 %

Reference 27.05 g

Nominal 130 %

+Tol 2.50 %

-Tol 2.50 %

129.06 %

Diff.% -0.94 %

Signature

........................