Operating instructions

The “Density” application
115
“Vol. Sinker”: Reports the volume of the sinker which was input using the
function key with the same name (for density determination
of liquids with the aid of a sinker).
“Vol. Gamma”: Reports the volume of the gamma sphere which was input using
the function key with the same name (for density determination
of pasty substances with the aid of a gamma sphere).
“Vol. Pycno”: Prints the pycnometer volume that was entered via the func-
tion key of the same name (determining the density of liquids
using a pycnometer).
“Wgt. Pycno”: Prints the pycnometer weight that was entered via the function
key of the same name (determining the density of liquids using
a pycnometer).
Factory setting: “Appl. Name”; no specific information items for density deter-
mination are activated.
If a report for an individual value is printed, the header line is automatically printed out
with it (as described below).
Reporting individual values
This submenu contains additional settings for density determination.
“Method”: Reports the selected density determination method.
“Aux. Liquid”: Reports the selected auxiliary liquid (density determination of
solid bodies).
“Density AL”: Reports the density of the auxiliary liquid which was input using
the function key with the same name. If water or ethanol is be-
ing used, the value taken from the built-in table is reported.
“Temp. AL”: Reports the temperature of the auxiliary liquid which was input
using the function key with the same name (for water and
ethanol).
“Vol. Sinker”: Reports the volume of the sinker which was input using the
function key with the same name (for density determination
of liquids with the aid of a sinker).
“Vol. Gamma”: Reports the volume of the gamma sphere which was input using
the function key with the same name (for density determination
of pasty substances with the aid of a gamma sphere).
“Vol. Pycno”: Prints the pycnometer volume that was entered via the func-
tion key of the same name (determining the density of liquids
using a pycnometer).
“Wgt. Pycno”: Prints the pycnometer net weight that was entered via the
function key of the same name (determining the density of
liquids using a pycnometer).
“Wgt. in Air”: Reports the weight of the sample in air (density of solid bod-
ies).
“Wgt. in Liquid”: Reports the weight of the sample in the auxiliary liquid (for den-
sity determination of solid bodies) or the weight of the sample
substance displaced by the sinker or gamma sphere.
“Wgt. of content”: Prints the weight of the sample in the pycnometer (determining
the density of liquids using a pycnometer).