Operating instructions

The “Density” application
124
To print the statistics, with the statistics window open press the «F» key. The printout will
contain those values which you activated in the “Statistics” submenu of the report set-
tings (section 10.3.8). An example of a report is shown at left.
Clear statistics
If you want to terminate a measurement series, press the “CL Result” key to clear the
associated statistics.
Note: The “CL Result” function key deletes the statistics for the currently selected method
of density determination. The statistics for other methods remain saved. Before you clear
any statistics, you must therefore make sure that you have selected the density
determination method whose statistics you want to clear (section 10.3.2)!
For safety, you are asked for confirmation before the statistics are finally deleted.
-------- Density -------
29.Jan 2005 15:55
Method Solid
Liquid Water
With Compensation
n 5
x 5.5004 g/cm3
s 0.0942 g/cm3
s.rel 1.71 %
Without Compensation
n 5
x 5.5062 g/cm3
s 0.0944 g/cm3
s.rel 1.72 %
With Compensation
Min 5.423 g/cm3
Max 5.603 g/cm3
Diff. 0.180 g/cm3
Without Compensation
Min 5.429 g/cm3
Max 5.609 g/cm3
Diff. 0.180 g/cm3
Signature
........................
------------------------