Operating instructions

The “Dynamic Weighing” application
128
11.3.1 Overview
With only a few exceptions, the settings available in the “Dynamic Weighing” application are identical to those of the “Weighing” application
( section 5.2). Only the settings that are different are described below. These settings are contained in the following menus:
The application-dependent settings can be accessed with the «E» key. When this key is
pressed, the first of 5 menu pages appears.
“Function Keys”: Additional function keys are available for dynamic weighing.
“Data Acquisition”: Adaptation of the application to the weighing object.
“Start Mode”: Setting for the start of the weighing.
“Beep”: Activates/deactivates the beep that signals completion of a weighing.
“Info Field”: Additional information fields are available for dynamic weighing.
“Reports”: Additional information is available for dynamic weighing reports.
“Single Value Print”: Activates/deactivates automatic printing of individual weighing results.
“Output channel selection”: Selects the destination for the data output (host and/or printer).
“Data output format”: Formats the output data.
“Statistics”: Activates/deactivates the statistics function.
“Smart & ErgoSens”: Special dynamic weighing functions can be assigned to the sensors.
Please note that in contrast to the “Weighing” application, no free units can be defined. Also, the “Minimum Weight” function is not avail-
able. In the following sections you will be given a detailed introduction to the specific settings for the “Dynamic Weighing” applic ation.
E