Operating instructions

The “Dynamic Weighing” application
136
11.3.12 Special SmartSens and ErgoSens settings for dynamic weighing
For the SmartSens and ErgoSens sensors additional settings are available for dynamic weighing.
“Start” and “Result” emulate the function keys with the same name. “OK” emulates press-
ing the button with the same name in the dialogs for dynamic weighing (but not in the
menu) to confirm inputs and actions.
If one of these settings is activated, the green “F” (function) in the status bar under the
corresponding sensor lights up.
Factory setting: “Off” for all 4 sensors.
11.3.11 Activate or deactivate statistics
In the “Statistics” menu you can specify whether the results of the individual weighings should be included in the statistics.
“Off”: The results of the weighings are not included in the statis-
tics.
“On”: The results of the dynamic weighings are included in the statistics
and can be subsequently evaluated. You will find information
about use of the statistics function in section 11.4.3.
Factory setting: “Off” (statistics deactivated)