Operating instructions

The “Differential Weighing” Application
142
The setting options for the “Differential Weighing” application are virtually identical to those for “Weighing” (section 5.2). Only the set-
tings that differ from the Weighing application are described below. These concern the following menus:
“Series”:
In this menu, you can define a new series, edit and delete existing series, and select a series for performing differential weighing.
“Function Keys”:
Additional function keys are available for differential weighing.
“Info Field”:
Additional information fields are available for differential weighing.
“Protocol”:
Additional protocol information can be defined for differential weighing.
“Print Key”:
In this menu, you specify whether values for the selected sample or for the whole series are printed when the «F» key is pressed.
“Bar Code”:
In this menu there is an additional setting for differential weighing.
“AntiStatic Kit” (Model dependent):
Settings for the optional antistatic kit (section 5.2.18)
Note: The unit of measure selected in the “Display Unit” menu is used for display and in the printed protocol. However, the application
always records and stores data internally using the unit “g” (grams).
The specific settings for the “Differential Weighing” application are described in detail in the following sections. Note: The menu for
defining and editing a series is very extensive, and is therefore described separately (see section 12.4).
12.3 Settings for the “Differential Weighing” Application
A number of specific settings are available for differential weighing, which can be used to adapt the application to suit your needs.
12.3.1 Overview
The application-specific settings can be accessed via the «E» key. The first of a total of 3
menu pages appears after pressing this key.
E