Operating instructions

The “Differential Weighing” Application
143
“Sample ID”: Use this function key to assign a name to each sample in the
current series.
“CL Sample”: Deletes all measured values for a sample and resets the sample
ID to the default text (see section 12.5.6). The sample itself
remains in the series.
“Series”: Use this function key to select the series with which you want
to w ork.
“Tare”: Tares a sample vessel in a separate operation.
“T & wgh. in”: Activates taring of the sample vessel with subsequent weighing
in of the sample.
“Initial weighing”: Initial weighing of the sample is performed in a separa te
operation.
“Residual wgh”: Starts the residual weighing of a sample.
“Info”: Displays information on the current series (sample IDs, mea-
sured values, results).
“No tare”: Enables differential weighing without tare. Only activate this
key if you want to measure a whole series without taring (see
section 12.5.6).
“Copy tare”: Copies the tare value of the first sample for all further samples
in the current series for which the tare value has not yet been
recorded (see section 12.5.6).
“CL value”: Deletes the weight value that was just recorded (tare, weigh-in
or re-weigh weight) (section 12.5.6).
All other function keys are identical to those for the “Weighing” application (section
5.2.2).
Factory default setting: “T & wgh. in”, “Residual wgh”, “Series”, “Info” and “CL value”
activated (in this order).
12.3.2 Specific Function Keys for Differential Weighing
The first two pages of the function key menu offer the following settings for differential weighing:
12.3.3 Specific Information Fields for Differential Weighing
The fo llowing settings for differential weighing are available in the menu for the informa-
tion fields:
“Series ID”: Displays the name of the selected series.
“Procedure”: Displays the procedure for the selected series (automatic or
manual).
“Number of sa.”: Displays the number of samples in the selected series.
All other information fields are identical to those for the “Weighing” application.
Factory default setting: “Series ID”, “Procedure” and “Number of sa.” activated (in this
order).