Operating instructions

The “Differential Weighing” Application
146
12.3.5 Print Key Behavior
In the “Print Key” menu, you can define which data is printed when the «F» key is pressed.
“Sample”: Pressing the «F» key displays a selection window that lists
all the samples in the current series. Here you can select the
sample for which you want to the print the data.
“Series”: When you press the «F» key, the data for all samples in the
current series is printed out.
Factory setting: “Sample”
12.3.6 Special settings for processing barcode data
The “Bar Code” menu contains an additional setting for differential weighing.
“Sample ID”: The barcode that has been scanned in is interpreted as the
sample identification. If there is a sample with this ID in the
current series, the respective sample is called up and is im-
mediately available for execution of the next work step. If the
current series does not contain a sample with this ID, a cor-
responding message appears.
Note: If a series contains several samples with the same ID,
the first sample whose ID matches the barcode that has been
read in is selected.
Factory setting: “Open Input”.