Operating instructions

The “Differential Weighing” Application
148
12.4.2 Editing an Existing Series
Choose “Series....Edit”. A selection field is displayed in which you can select the series that you want to edit. For editing, the same op-
tions are available as for defining a new series (see the previous section).
Note: It is only possible to reduce the number of samples in the series if you do not delete samples for which measured values already
exist. Example: If you reduce the number of samples for a series from 20 to 10, and measured values already exist for sample 15, the
number of samples can only be reduced to 15. You can only continue to reduce the series by deleting the measured values for the
affected samples (in this case the measured values for samples 11 – 15).
Choose “Series....Clear”. A selection field is displayed in which you can select the series
that you want to delete. Before the series is deleted, the prompt displayed opposite ap-
pears. If you respond with yes, the series is deleted together with all measured values
and calculated results.
Attention: All series are stored in a single database that is avail-
able to all users. You can therefore also delete series created by
other users. For this reason, you should proceed with caution when
deleting a series, and consult other users if necessary.
12.4.4 Selecting a Series for Differential Weighing
Choose “Series....Selection”. A selection field is displayed in which you can select the series with which you want to work. Note: Instead
of selecting the series via the menu, we recommend that you activate the “Series” function key, which enables you to select a series
directly without having to use the menu (see section 12.3.2).
Attention: All series are stored in a single database that is available to all users. You can therefore also edit series
created by other users. For this reason, you should proceed with caution when editing a series and consult other
users if necessary.
12.4.3 Deleting a Series