Operating instructions

Error and status messages
160
15.3 Status messages
Status messages are displayed by means of small icons (symbols) in the top right of the display (under the date and time) (section 2.2).
The status icons indicate the following:
The balance would like to carry out a fully automatic ProFACT adjustment (see Operating instructions – Part
3) but is unable because another operating sequence is running. The adjustment is carried out as soon as the
balance is unloaded, the display becomes stable and no key has been pressed for 2 minutes. The status icon
disappears after the adjustment is successfully completed.
You have specified in the system settings that the balance should automatically request an adjustment using
an external weight (section 5.4.2). The balance uses this status icon and a corresponding message to prompt
you to carry out the adjustment. The status icon fades after the adjustment is successfully concluded or if you
indicate your decision not to carry out the adjustment (section 5.4.2).
You have specified in the system settings that the balance should automatically request adjustment testing
using an external weight (section 5.4.4). The balance uses this status icon and a corresponding message to
prompt you to carry out the test. The status icon fades after the adjustment is successfully concluded or if you
indicate your decision not to carry out the adjustment (section 5.4.4).
The “MinWeigh” is active (section 5.2.14). This status icon informs you that the minimum weigh-in value for the
current tare has not been reached yet and that the current weight value is outside the tolerance range speci-
fied by your quality assurance system. The status icon fades as soon as the minimum weigh-in value has been
reached (section 5.3.6).
It is time for the next scheduled test of the “MinWeigh” function (section 5.3.6). Contact your dealer’s customer
service department as soon as possible to have a service technician run the test.
The battery in your balance must be replaced. This battery ensures that the date and time are not lost when the
balance is disconnected from the network. Contact your dealer’s service department as soon as possible to have
a service technician change the battery.
Your balance is due for servicing. Contact your dealer’s customer service department as soon as possible to
have a technician service your balance.
The built-in level sensor (Model-dependent) has determined that the balance is not correctly leveled. This status
icon normally appears together with a warning text. Level the balance immediately (see Operating instructions
– Part 1). The status icon will disappear as soon as the balance is leveled correctly..
When the “Task is Waiting” icon is displayed, it means that a scheduled task to be performed is still pending.