Operating instructions

System settings
24
3.8 Configuring the security system
This menu can be used to change the administrator ID and password, reset all balance settings, allocate access rights for individual
users and define specifications for recording security-related operations.
Important: This menu is protected ex works with an ID and a password. When the menu is called up, the following two dialog boxes
appear for entering the administrator ID and administrator password:
The character “Z” is set for the administrator ID and administrator password ex works.
Type this character in each of the dialog boxes and confirm using “OK”. If the ID and/or
password are incorrect, you will be asked to enter them again. If the entries are correct,
the following menu appears:
Detailed information on the options available for the security system of your balance can
be found in later sections.
Attention!
– The ID and password must always be entered in the same language in which they
were defined. If you change the dialog language (section 4.4), you may no longer be
able to enter the access codes.
– If the balance is controlled by the commands of an external host, the password protec-
tion will not function.