Operating instructions

System settings
25
3.8.1 Changing the administrator ID and password
The “Administrator ID” and “Administrator Password” menus can be used to change the factory-set access codes (“Z” for ID and pass-
word). Note: Both an ID and a password must be defined (max. 20 characters). If you delete the existing entry and do not enter a new
one, an error message appears.
CAUTION: Note the administrator ID and password carefully. If you forget one of the codes, it is not possible to regain access
to the menu areas that are protected with these access codes. We recommend that you note down your ID and password and
keep them in a safe place.
3.8.2 Performing a global balance reset
In the “Master Reset” menu all the balance settings can be reset to the factory default
settings. When the “Execute” button is pressed, the prompt opposite appears. If you do
not want to reset, press “C”.
WARNING: If you confirm the reset using “OK”, the balance restarts
and all user and application-specific settings are reset to the factory
default settings. As a result, all individual settings are lost. With
the exception of the recorded adjustment operations (section 3.7
of the separate document Operating Manual for XP Balances –
Part 3) and the date and time, all system settings are also reset,
including the administrator ID and administrator password.
3.8.3 Defining user access rights
Access rights for all 8 user profiles can be defined in the “Rights Home” and “Rights User
1” ... “Rights User 7” menus. You can also specify the selection of applications for each
user profile. Note: The designations in the user profile (“User 1”, etc.) are set at the factory.
You can change the designations in the user-specific settings (section 4.4).
When the “Define” button is pressed, you can define whether the selected user profile should
be protected with ID and password and which menu areas, if any, should be protected:
“Appl. Setup”: All application-specific settings («E» key), (section 5ff).
“Wghparam”: All weighing parameters, which are available in the user-specific
settings («C» key) (section 4.3).
“Adjustweight”: Definition of the external adjustment weights in the system
settings “Adjust/Test” menu (section 3.1 of the separate docu-
ment Operating Manual for XP Balances – Part 3).
“User”: User profile selection («B» key), (section 2.4).
“User ID/Password”: Definition of the ID and password in the user-specific settings
“User” menu (section 4.4).
“System”: All system settings (section 3).
“User Settings”: All user-specific settings («C» key), (section 4).
“Application”: Application selection using the «D» key (section 2).