Operating instructions

System settings
29
When you are in the menu for the system settings, you can print them at any time by
pressing the «F» key (provided that a printer is connected and activated as the output
device in the peripheral settings).
The illustration opposite shows an excerpt from a printout of the system settings.
Note: The scope of the printout depends on where in the system settings you initiated the
printout. If the «F» key is pressed at the highest level of the system settings, all system
settings will be printed. However, if printing is started in the “Peripherals” menu, which is
the lowest level, only the settings for the peripheral devices will be printed.
Note: The following submenus in Adjust/Test Menu must be printed out separately:
- Adj/Test weight
- Test Sequences
- Tasks
3.10 Printing the system settings
System
Adjust/Test
ProFACT On
ProFACT
ProFACT
Weekdays
Monday x
Tuesday x
Wednesday x
Thursday x
Friday x
Saturday x
Sunday x
Time 1 9:00
ProFACT
Time
Time 2 Off
ProFACT
Time
Time 3 Off
ProFACT
Time
Temp.Criterion 1 Kelvin
Protocol Trigger On
Autom. ext. Adjust. Off
Autom. ext. Adjust.
Autom. ext. Adjust.
Weekdays
Monday x
Tuesday -
Wednesday -
Thursday -
Friday -
Saturday -
Sunday -
Autom. ext. Test Off
Autom. ext. Test
Weekdays
Monday x
Tuesday -
Wednesday -
Thursday -
Friday -
Saturday -
Sunday -
Time 9:00
Time
Test History
Adj. History
Adj. History Selection
Selection
Manual adjust. x
Temperature x
Time Adjust. x
Display Datasets Last 50
Protocol
Date/Time x
User x
Balance Type x
SNR x
SW-Version -
Balance ID -
Weight ID -
Certificate No. -