Operating instructions

User settings
32
4.4 Entering user data
This menu can be used to define user names, select the dialog language and define user access codes.
The following options are available:
“User Name”
The name of the current user profile can be changed here (max. 20 characters). Alpha-
numeric characters can be entered in the input window. Note: If the name you enter is
already being used, an error message appears.
After modification, the user profile appears under the new name in the top left of the display
and in the profile menu («B» key). The user name is also printed in the records.
Factory setting: “User x” (x = 1 .. 7) and “Home”
“Language”
This menu can be used to select the dialog language, in which you want to communicate
with the balance. The language is switched immediately. All menus and messages appear
in the selected language, with the exception of the interface parameters in the system
settings (these are always in English).
Attention! If the dialog language is changed, you may no longer be able to enter the
access codes for the administrator and user (password and ID). This is why the ID and
password must always be entered in the same language in which they were defined.
Factory setting: Generally, the language of the destination country is preset.
“User ID” and “Password”
The current user access codes (ID and password, max. 20 characters each) can be
changed in these two menus, which have identical dialog boxes. These codes are required
for accessing menu areas that have been protected at user level by the administrator
(section 3.8.3). If you delete the existing ID or password and do not enter a new code,
an error message appears. Note: If access to both of these menus has been protected
by the administrator, you must enter the current ID and password before you can change
the codes.
Factory setting: For ID and password:
“0” (Null) for the “Home” profile
“1” for the “User 1” profile ... “7” for the “User 7” profile