Operating instructions

User settings
36
4.8 Printing user-specific settings
When you are in the menu for the user-specific settings, you can print them at any time
by pressing the «F» key (provided that a printer is connected and activated as the output
device in the peripheral settings). The settings for the active user profile are printed.
The illustration opposite shows a printout with specific settings for the user profile
“User 1”.
Note: The scope of the printout depends on where in the user-specific settings you initiated
the printout. If the «F» key is pressed at the highest level of the user-specific settings, all
settings will be printed. If, for example, printing is started in the “Terminal” menu, only the
settings for the terminal will be printed.
4.7 Resetting user profile settings
This menu can be used to reset all settings for the active user profile to the factory default settings.
For security reasons, the above prompt appears. If you do not want to reset, press “C”.
ATTENTION: If you confirm the reset using “OK”, the balance restarts and all user
and application-specific settings for the active user profile are reset to the factory
default settings. Consequently, all individual settings, including user ID and user
password, are lost.
User Setting
Wghparam
Weighing Mode Universal
Environment Standard
Value Release
Reliable+Fast
AutoZero On
User
User Name User 1
Language English
User ID 1
Terminal
Brightness 80
Colour selection
PaletteBlueCold
Sound 70
Touch Function On
Optical key feedback On
Speedread On