Operating instructions

The “Weighing” application
38
The following settings are available on the third menu page:
“Protocol”: For selecting the information that is to be included in the
weighing printouts (section 5.2.8).
“Print Key”: For specifying the behavior of the «F» key for manually printing
weighing results (section 5.2.9).
“Transfer Key”: Format of the data that are output with the “Transfer” function
key (section 5.2.10).
“Identification”: For defining IDs (section 5.2.11).
The following settings are available on the fourth menu page:
“Bar Code”: These settings are only relevant if a bar code reader is connected.
Allows you to specify how bar code data is to be processed
(section 5.2.12).
“Ext. Keyboard”: These settings are only relevant if an external keyboard is
connected. Allows you to specify how keyboard inputs are to
be processed (section 5.2.13).
“MinWeigh”: The “MinWeigh” function ensures that the weighing results
are within a specified tolerance range, in accordance with the
requirements of your quality assurance system. Here you can
define the specifications for this function (section 5.2.14).
“Tare Store”: Up to 10 tare weights can be predefined here, which can be
called up during the weighing operation (section 5.2.15).
The following settings are available on the fifth menu page:
“AutoTare”: The automatic tare function automatically stores the first stable
weight as the tare value. Here you can define the specifications
for this function (section 5.2.16).
“Smart & ErgoSens”: For programming the two “SmartSens” sensors on the terminal.
In addition, up to two external “ErgoSens” sensors (optional)
can be allocated a function in this menu (section 5.2.17).
“AntiStatic Kit”: Model dependent
Settings for the optional antistatic kit (ionizer), which allows you
to eliminate the static charge from weighing material (section
5.2.18).
Once you have defined all the required settings, press the “OK” button to return to the
active application.
The various settings for the “Weighing” application are described in detail in the following
sections.
Printing the application-specific settings:
When you are in the menus for the application-specific settings, you can print the settings
at any time by pressing the «F» key (provided that a printer is connected and activated
as the output device in the system settings).
The illustration opposite shows an excerpt from a printout of the application-specific
settings.
Weighing
Function Keys
ID -
Nominal -
+Tol -
-Tol -
Lotcounter -
Adjust.int 1
Adjust.ext -
Test int -
Test ext -
PreTare -
Tare Store -