Operating instructions

The “Weighing” application
40
This menu can be used to select the “SmartTrac” display type or disable the function.
Note: This menu can also be called up directly from the application by touching
“SmartTrac”.
Factory setting: Round “SmartTrac” enabled.
5.2.4 Selecting information fields
The information fields continuously provide information on the set values, the recorded results, etc. In the application, the information
fields appear on the left-hand side of the display, below the weighing result.
This menu can be used to specify which
information fields are to be displayed. The
fields assigned a number will be displayed
in the application. The numbers determine
the order of the information fields in the
display. Important: For reasons of space,
a maximum of 4 information fields can
be activated. When an information field is
activated or deactivated by touching it, the
order of the fields is updated automatically.
“Adj. History”: This function key can be used to display a list of adjustment operations that have been
carried out (the operations that were selected in the system settings are displayed, see
section 3.3.1).
“Transfer”: This function key allows the current weight value to be sent directly to the connected host
computer, without additional data (additional information). If desired, the output data can
be formatted (section 5.2.10).
“Test Sequence”: This function key can be used to display a list of tasks whose settings are in “Manual” (see
section 3.3.2 on the separate Operating Instructions – Part 3).
“Balance Info”: This function key can be used as a short-cut key for the “Show” button in the balance
information menu (see section 3.4).
“GWP History”: This function key opens the GWP-History (see section 3.7 on the separate Operating
Instructions for XP Balances – Part 3). All test results that are saved in the GWP History
will be displayed.
Factory setting: “Adjust. int.” and “1/10d” activated.
5.2.3 Selecting “SmartTrac”
“SmartTrac” is a graphic weighing-in aid, which can be used to display the used and available weighing range at any time (in some
applications, SmartTrac even simplifies weighing in to a specific nominal value). In the application, “SmartTrac” appears below the
weighing result on the right-hand side of the display (section 2.2).
To completely redefine the order of the fields, first deactivate all the information fields and then activate them in the desired order. Press
“STD” to return to the factory default setting; press “C” to exit the input window without saving. To save the modifications, press “OK”.