Operating instructions

The “Weighing” application
45
5.2.9 Specifications for manual record printing
The settings in the “Print Key” menu can be used to specify the behavior of the «F» key (record printing).
“Stable”: When the «F» key is pressed, the record is not printed until
the weighing result is stable.
“Dynamic”: When the «F» key is pressed, the record is printed immediately,
regardless of whether the weighing result is stable or not.
“Off”: When the «F» key is pressed, no record is printed as the key
is inactive.
Factory setting: “Stable”.
Options for record footers
------- Weighing -------
24.Feb 2005 17:30
T1
T2
User Name User 1
Balance Type XP6002S
Balance ID Lab A/1
ID1
Balance is levelled
Nominal 0.00 g
+Tol 2.50 %
-Tol 2.50 %
MW-Method Off
Min.Weight by Tare
------------------------
Signature
........................
------- Weighing -------
24.Feb 2005 17:32
N 1021.53 g
T 41.37 g
G 1062.90 g
------------------------
This submenu can be used to define the information to be printed at the bottom of the weighing record after the results (single val-
ues). The footer is printed when the “Footer” function key is pressed. The footer options are the same as those for the header, only the
“Levelcontrol” option is unavailable.
Factory setting: “Signature” is activated.
Sample printouts
“Header” / “Footer” “Single Values”