Operating instructions

The “Weighing” application
48
5.2.11 Defining IDs and record titles
This menu can be used to activate and rename the 4 IDs, which are available under the “ID” function key (section 5.2.2). In addition,
you can define two titles for the weighing records.
Record Title (“Title 1” and “Title 2”):
The names entered (e.g., the company name) can be printed in the weighing records.
The maximum permissible length of the record title is 20 characters.
IDs (“ID 1 Name” ... “ID 4 Name”):
Select the ID that you wish to activate/deactivate or rename. Note: Deactivated IDs (“Off”)
can no longer be selected under the “ID” function key.
A window appears, in which you can activate the ID and rename it.
Field for the weight unit
In the standard output format, each weight value is output with the associated weight
unit (corresponding to the current display unit). In this menu you can choose whether
weight units should be transmitted with or without unit and also specify the field length
for the weight unit (1 – 5 characters). Irrespective of your setting for the field length,
enough decimal places will be output for the weight value shown on the terminal to be
completely transmitted. The weight unit is output left-justified (separated from the weight
value by a space character).
Factory setting: Output of the weight unit is activated.
Field length 3 characters.
Data output on the printer
When you press the “Transfer” function key, the data are normally only transmitted to the
host. If you also want to send the data to the printer, activate the setting “Data transfer
to printer”. Note: The previously described settings for formatting the data do not affect
how the data are output on the printer. This is entirely controlled by the protocol settings
(section 5.2.8).
Factory setting: Data output on the printer is deactivated (“Off”).