Operating instructions

The “Weighing” application

5.3.3 Working with the item counter

The item counter numbers each weight value in the report printout, whereby the number automatically increases by 1 for each new

item.

To use the item counter, the relevant function key must be activated (section 5.2.2).

Note: When working with the item counter, we recommend that you also activate the

corresponding information ﬁeld (section 5.2.4). You can then view the current status of

the item counter at any time.

When the function key is pressed a numeric input ﬁeld appears, in which the start value for

the item counter can be speciﬁed. The value is preset to 0 ex works, i.e. the item counter

is switched off. To activate the item counter, enter a start value between 1 and 999.

Each time a weighing record is printed using the «F» key, the weight value is preceded

by a number, which increases by 1 for each new item. When the counter reaches the

maximum value of 999, the numbering restarts from 1.

Note: The item counter can also be used with automatic record printing (section 5.2.5).

Using the automatic tare function

The balance can be conﬁgured so that the ﬁrst weight placed on the pan is always automatically interpreted as the tare. The “AutoTare”

function must be activated in the menu in order to use this function (section 5.2.16).

To start automatic taring, press the «G» button (otherwise the tare weight will not be used automatically), then place the empty

container on the weighing pan. As soon as the weight value becomes stable, this is used as the tare value. The weight display is set

to zero and the “Net” icon appears. You can now begin weighing. After the full container is removed, the “Net” icon disappears and the

stored tare value is deleted.

Working with tare memories

If you are working with different tare containers, you can store their weights and call them up at any time during the weighing operation

at the touch of a button. Up to 10 tare memories can be deﬁned.

In order to use the tare memory, the “Tare Store” function key must be activated (section 5.2.2)

and the desired tare memory must be deﬁned and activated (section 5.2.15).

When the “Tare Store” function key is pressed, a window appears in which you can select

the desired tare memory. The memory names correspond to those that were deﬁned in

the menu (“Tare 1”... “Tare 10” are only example names).

Select the desired memory and the corresponding tare value is loaded immediately. The

tare value remains active until a new tare memory is selected, the «G» or «H» key

is pressed, the application is changed, another user proﬁle is selected, or the balance is

switched off.

1 N 235.87 g

2 N 604.24 g

3 N 817.96 g