Operating instructions

The “Weighing” application
61
Pressing this function key checks that your balance was adjusted correctly using the
internal weight.
The test procedure is the same as that described in section 5.4.1 (only for factory default
settings).
Following successful completion of the test, the window opposite is displayed as confirma-
tion. If a printer is connected to the balance, the test is printed automatically according to
the specifications selected in the system settings for printing (section 3.8 of the separate
document Operating Manual for XP Balances – Part 3). A sample printout can be found
in section 5.4.5.
If the test was aborted due to an error, an error message is displayed.
5.4.3 Testing adjustments using an internal weight
5.4.4 Testing adjustments using an external weight
Pressing this function key checks that your balance was adjusted correctly using an
external weight. This can be implemented at any time.
You can also specify in the system settings that the balance prompt for an adjustment
test using an external weight on certain days and at a particular time (section 3.6 of the
separate document Operating Manual for XP Balances – Part 3). In this case, the small
weight icon for automatic adjustment testing is displayed until the test is successfully
completed or until you indicate at the time of the second request that you have decided
not to carry out the test.
The test procedure is the same as that for adjustment using an external weight (section
5.4.2).
Following successful completion of the test, the window opposite is displayed. If a printer is
connected to the balance, the test is printed automatically according to the specifications
selected in the system settings for printing (section 3.8 of the separate document Operating
Manual for XP Balances – Part 3). A sample printout can be found in section 5.4.5.