Operating instructions

The “Statistics” application

Note

– If you press the “M+” function key when a weight change has not occurred, an error

message appears. This prevents the same sample from being measured twice.

– If a weight value is outside the plausibility limit (section 6.3.7), a corresponding error

message appears after the “M+” key is pressed, and the value cannot be transferred

to the statistics. If the automatic weight transfer is activated (section 6.3.4), no error

message appears, the value is not transferred to the statistics and will also not appear

in the statistics printout.

– If a weight is accidentally placed on the pan and the weighing result has been saved,

the last value can be deleted using the “CL Last” function key (only available if values

are already present in the memory, otherwise the key is grayed out and cannot be

pressed). The key is deactivated after a value is deleted and can only be used again

once the next value has been transferred to the statistics.

Once all the samples have been weighed in, press the “Result” function key (only avail-

able if values are present in the memory; otherwise the key is grayed out and cannot be

pressed). This pauses the measurement process and opens the results window (the series

can still be continued at any time). Note: If you speciﬁed the number of samples in the

series using the “Max n” function key before starting the weighing process, the results

window opens automatically after the last sample is weighed in and indicates that the

maximum number of samples has been reached.

The results window contains the results of the weighing series (the information selected

for printing the result is displayed, see section 6.3.5). Please refer to the notes in section

6.4.3 regarding the units, resolution and accuracy of displayed values.

If the results window contains several screen pages, two arrow keys appear at the bottom

of the screen, which can be used to access the individual pages. Press the «F» key to

print the printed results record.

A complete sample printout with all the statistical values can be found in section 6.4.3.

If you have deﬁnitely completed the measurement process and wish to clear the memory

in preparation for the next series, press the “CL Result” function key (a safety prompt is

displayed, which must be conﬁrmed before the statistics are actually deleted). Note: If the

statistics contain no values, the key is inactive and will appear grayed out.