Operating instructions

The “Formulation” application
74
E
D
If the “Formulation” application is not already active, press the «D» key. Touch the applica-
tion icon in the selection window.
The display opposite appears when the application is selected. The special function keys and
information fields for formulation are activated ex works. These and other settings can be
adapted to your requirements, according to the descriptions in the following sections.
Note: The two function keys for “Result” and “CL Result” are displayed in gray, since no
formulation has been carried out yet.
7.3 Settings for the “Formulation” application
A number of different specific settings are available for Formulation, and these can be used to adapt the application to your require-
ments.
7.3.1 Overview
7 The “Formulation” application
This section describes the “Formulation” application. You will find information here about the practical aspects of working with this
application and about its specific settings. Please note that all settings for the “Formulation” application are stored under the
active user profile. User-specific settings can thus be entered for this application. Therefore, make sure that you have selected
the desired user profile first.
7.1 Introduction to the “Formulation” application
The “Formulation” application can be used for weighing in components that are to be combined in a specific ratio. Databases are avail-
able for permanently storing all relevant parameters for formulae and components. The selected formula is processed automatically
in the formulation operation and the balance weighs in all components step by step. Naturally, it is also possible to “free formulate”
without using formulae from the database. The result can be printed in detail at the end of a formulation.
Many of the application-specific settings are identical to those of the “Weighing” application. However, additional settings and functions are
available for Formulation. This section describes in detail only the settings and functions that differ from the “Weighing” application.
7.2 Selecting the application
The application-specific settings can be accessed via the «E» key. When this key is pressed,
the first of 4 menu pages is displayed.