Operating instructions

The “Formulation” application
75
“Recipe”:
For defining recipes.
“Component”:
For defining components.
“Autom. Zeroing”:
Automatically zeroes when the tare con-
tainer is removed.
“Function Keys”:
Additional function keys are available for
Formulation.
“Info Field”:
Additional information fields are available
for Formulation.
“Protocol”:
Additional record information is available
for Formulation.
“Identification”:
Special ID names are defined ex works for
Formulation.
“Smart & ErgoSens”:
Special functions can be assigned to the
sensors for Formulation.
“AntiStatic Kit” (Model-dependent):
Settings for the optional antistatic kit (sec-
tion 5.2.18)
Please remember that, unlike the “Weighing” application, no “Info Unit” is available. The specific settings for the “Formulation” applica-
tion are described in detail in the following sections. Note: The menus for defining components and formulae are quite extensive and
are therefore described separately (sections 7.4 and 7.5).
7.3.2 Activating/deactivating automatic zeroing
In the “Autom. Zeroing” menu you can specify whether the display should automatically reset to zero when the tare container is re-
moved.
The setting options for the “Formulation” application are virtually identical to those for the “Weighing” application (section 5.2). Only
the settings that differ are described below. They apply to the following menus:
“On”: Automatic zeroing is activated. When the tare container is
removed, the display is automatically reset to zero if taring has
taken place and at least one component has been weighed.
“Off”: Automatic zeroing deactivated.
Factory setting: “Off” (automatic zeroing deactivated)