Operating instructions

The “Formulation” application
77
7.3.5 Special record information for Formulation
The three submenus for defining the record header, printing single values and for the result
contain additional settings for the Formulation, which are described below.
Note: All other information fields are identical to those of the “Weighing” application
(section 5.2.8).
Record header
Additional settings for Formulation are available on the second page of this submenu:
“Recipe Name”: Prints the name of the current formula.
“Recipe ID”: Prints the identification (ID1) of the current formula.
“Nominal Tot.”: Prints the sum of the nominal weight values of all components
of the current formula.
“Num. of Comp.”: Prints the number of components of the current formula.
Factory setting: “Appl. Name” (“Formulation” is printed), “Date/Time”, “Balance
Type”, “Serial Numbers” and “Recipe ID (in this order).
The header is printed automatically when the “M+” function key is pressed during formula-
tion to save the weight of the first component.
Printing single values
The following special settings are available in this submenu for the formulation:
“Recipe Name”: Prints the name of the current formula.
“Recipe ID”: Prints the identification (ID1) of the current formula.
“Nominal Tot.”: Prints the sum of the nominal weight values of all components
of the current formula.
“Num. of Comp.”: Prints the number of components of the current formula.
“Comp. ID”: Prints the ID of the current component (ID2).
“Lot ID”: Prints the lot ID (ID3) defined via the “ID” function key.
“Additional ID”: Prints the additional ID (ID4) defined via the “ID” function
key.
“Comp. Name”: Prints the name of the current component.
“Comp. Counter”: Prints the current state of the component counter (number of
the current component).
“Nom.,+Tol,-Tol”: Prints the defined nominal weight of the current component
and the defined tolerances.