Operating instructions

The “Formulation” application
83
When defining specifications for the individual components, a percentage nominal value
must be entered instead of an absolute nominal weight (depending on the selected “Basis”,
this refers to either the total weight of the formula or the first component).
The remaining settings and specifications for the components are identical to those for
formulae with “absolute components”.
Important note for formulae with percentage nominal values, which refer to the total
weight: The balance does not check whether the sum of all component percentages is
100 %. If this sum is above or below 100 %, the defined percentages and the nominal
weights to be weighed in are adapted automatically during the formulation operation, as
shown in the example below:
Specifications:
Nominal value Component 1: 80 %, nominal value Component 2: 40 %, final weight:
100 g
Automatic calculation of the nominal weights to be weighed in:
Component1:80%/120%•100 g=66.67 g
Component2:40%/120%•100g=33.33 g
7.5.3 Printing the formula definitions
When you are in the menu for defining a specific formula, you can print the settings and specifications for the current formula at any
time by pressing the «F» key.
The following examples show (from left to right) one sample printout for a formula with absolute nominal weights, one with relative
nominal values in relation to the total weight and one with relative nominal values in relation to the first component.
Recipe 2 Fix Component
Name Eraphtene
ID ERA-1
Security Check Off
Procedure 1 Tare
Component 1
Name Renith 80 o/o
ID R80
Component Weight
24.16 g
+Tolerance 2.50 %
-Tolerance 2.50 %
Component 2
Name Lorine-BR
ID LBR
Component Weight
16.45 g
+Tolerance 2.50 %
-Tolerance 2.50 %
Component 3
Name Alcohol 90 o/o
ID Alco 90
Component Weight
77.00 g
+Tolerance 2.50 %
-Tolerance 2.50 %
Recipe 3 % Component
Name Iorex-MP
ID IORX
Security Check Off
Basis Total weight
Component 1
Name UM Powder A
ID UPA
Component % 22.6 %
+Tolerance 2.00 %
-Tolerance 2.00 %
Component 2
Name UM Powder B
ID UPB
Component % 77.4 %
+Tolerance 3.00 %
-Tolerance 3.00 %
Recipe 4 % Component
Name Meranit-411
ID ME-411
Security Check Off
Basis 1. Comp. Weight
Component 1
Name RF Subst. A
ID RF-A
Component % 75.0 %
+Tolerance 2.50 %
-Tolerance 2.50 %
Component 2
Name Sirine Liq. 16
ID SI-LIQ
Component % 40.0 %
+Tolerance 1.50 %
-Tolerance 1.00 %