Operating instructions

The “Formulation” application
89
7.6.5 Sample printout of a formulation
The figure opposite shows the sample printout of a formulation (the corresponding formula
definition can be found in section 7.5.3, “Formula 3”).
The values printed in the header, as single values and as the result depend on your
individual record settings (section 7.3.5).
Only specific information for the formulation is explained below. Notes on additional record
information can be found in section 5.2.8:
“Recipe”: Name of the formula.
“Recipe ID”: Identification of the formula (“ID1”).
“Comp.”: Prints the number of components of the current formula.
“Nominal Tot.“: Sum of the nominal weight values of all components.
“Comp. ID”: Defined name of the component (“ID2”).
“Num. of Comp.”: Status of the component counter (current comp./number of
comp.).
“Nominal”: Nominal weight of the component.
“+Tol” and “-Tol”: Defined tolerances for a component.
“N” [g]: Weight of the relevant component.
“N” [%]: Weight of the relevant component as a % of the nominal
weight.
“Diff.” [g]: Difference between the actual and nominal weight of the
relevant component.
“Diff.” [%]: Percentage deviation of the actual weight of the relevant
component from its nominal weight.
“Net Tot”: Net total weight of all components.
----- Formulation ------
20.Jan 2004 16:09
User Name User 3
Recipe Iorex-MP
Recipe ID IORX
Num. of Comp. 2
Nominal Tot 84.30 g
Comp. ID UPA
Comp 1/2
Nominal 19.22 g
+Tol 0.38 g
-Tol 0.38 g
1 N 19.24 g
1 N 100.1 %
1 Diff 0.02 g
1 Diff 0.1 %
Comp. ID UPB
Comp 2/2
Nominal 65.08 g
+Tol 1.95 g
-Tol 1.95 g
2 N 65.21 g
2 N 100.2 %
2 Diff 0.13 g
2 Diff 0.2 %
Net Tot 84.45 g
Signature
........................
------------------------