Operating instructions

The “Piece Counting” application
91
E
D
8 The “Piece Counting” application
This section describes the “Piece Counting” application. You will find here information on how to work with this application and on
the relevant setting options. Please note that all settings for the “Piece Counting” application are stored under the active user
profile. User-specific settings can thus be entered for this application. Therefore, make sure that you have selected the desired
user profile first.
8.1 Introduction to the “Piece Counting” application
The “Piece Counting" application allows you to count pieces. The application provides several different methods for determining the
reference piece weight.
Many of the application-specific settings are identical to those of the “Weighing” application. However, additional application-specific
function settings are available for Piece Counting. In the following description, only those settings are described in detail which differ
from the “Weighing” application.
Note: If you use the “Piece Counting” function in conjunction with the METTLER TOLEDO LC-I/O relay interface, please note the informa-
tion provided in the “Solution Guide”, which is available on the Internet (www.mt.com).
8.2 Selecting the application
8.3 Settings for the “Piece Counting” application
A number of different specific settings are available for piece counting, and these can be used to adapt the application to your require-
ments.
8.3.1 Overview
If the “Piece Counting” application is not already active, press the «D» key. Touch the
application icon in the selection window.
The display opposite appears when the application is selected. Some of the special func-
tion keys, as well as a special information field for piece counting, are activated ex works.
The function keys and other settings can be adapted to your requirements, according to
the descriptions in the following sections.
The application-specific settings can be accessed via the «E» key. When this key is pressed,
the first of 4 menu pages is displayed.