Operating instructions

The “Piece Counting” application
92
The setting options for the “Piece Counting” application are virtually identical to those for the “Weighing” application (section 5.2). Only
the settings that differ are described below. They apply to the following menus:
“FixPcs”:
Allows you to specify a fixed reference
piece number.
“Function Keys”:
Additional function keys are available for
piece counting.
“Info Field”:
Additional information fields are available
for piece counting.
“Autom. Weight Transfer”:
This setting can be used to automatically
calculate total piece counts.
“Display Unit” and “Info Unit”:
The “PCS” unit is also available for piece
counting.
“Protocol”:
Additional record information is available
for piece counting.
“Smart & ErgoSens”:
Special functions can be assigned to the
sensors for piece counting.
Keep in mind that, unlike the “Weighing” application, you can specify only one free unit. The “MinWeigh” function is also not available.
The specific settings for the “Piece Counting” application are described in detail in the following sections.
8.3.2 Specifying the fixed reference piece number
This menu can be used to assign a fixed reference piece number to the “FixPcs” function
key (section 8.3.3). After pressing the corresponding button, an input window appears in
which you can define the desired reference piece number.
Each time the “FixPcs” function key is pressed during a piece count, the weight in the
weighing pan is divided by the specified fixed reference piece number. This determines
the reference piece weight, which serves as the basis for the piece counting.
Note: The “FixPcs” function key is marked “Fix n” where “n” is the reference piece count
selected here. Example: “Fix 10”.
Factory setting: 10 PCS.