Operating instructions

The “Piece Counting” application

Take the pieces from the ﬁrst count out of the weighing pan. Carry out the series of piece

counts in sequence. Conﬁrm each result using the “M+” function key, then lift off the pieces.

Each time a result is transferred to the statistics, it is printed automatically.

Note

– If you press the “M+” function key when a weight change has not occurred, an er-

ror message appears. This prevents you from accidentally recording the same result

twice.

– If the function for automatic weight transfer is active (section 8.3.5), there is no need

to press the “M+” key for recording a result, as the value is transferred to the statistics

automatically.

– If an incorrect piece count is saved by mistake, it can be removed from the statistics by

using the “CL Last” function key. But you can do this only for the most recently recorded

result. The “CL Last” function key is active only if there are values present in the memory.

Otherwise, the key is grayed out and cannot be pressed. The key is deactivated after a

result is deleted and can only be used again once the next result has been transferred

to the statistics.

Once all the piece counts of the series have been carried out, press the “Result” function

key. (This is only available if values are present in the memory. Otherwise, the key is grayed

out and cannot be pressed.) This pauses the piece count series and opens the results

window (the series can be continued at any time). Note: If you speciﬁed the number of

piece counts in the series using the “Max n” function key, the results window opens auto-

matically after the last piece count is recorded and indicates that the maximum number

of piece counts has been reached.

The results window contains the results of the counting series (the information selected

for printing the result is displayed, see section 8.3.7). Please refer to the notes in section

8.4.5 regarding the units, resolution and accuracy of displayed values.

If the results window takes up several display pages, you can use the arrow keys to switch

back and forth between the pages. Press the «F» key to print the results record.

A complete sample printout with all the statistical values can be found in section 8.4.5.

If you have deﬁnitely completed the current piece count series and wish to clear the

memory in preparation for the next series, press the “CL Result” function key (a safety

prompt is displayed, which must be conﬁrmed before the statistics are actually deleted).

Note: If the key is grayed out, the statistics do not contain any values.