Operating instructions

62
Operating instructions METTLER TOLEDO AT balances
Automatic stability detection
Your AT achieves stability quicker if
you reduce the stability detection. If you
select, for example, stage 1( ASD –1– )
instead of stage 6 ( ASD –6– ), the
balance releases the weighing result as
stable decidedly more quickly (see
Section 4.4).
Glass draft shield, Inner draft shield
Your AT operates faster if you open
the draft shield to load the balance
only as much as necessary. So that
excellent weighing results can also be
achieved fast under difficult weighing
conditions, you can also use an inner
draft shield. (Order number 210270).
The disturbing effects of any incoming
drafts in the weighing chamber are
thus lessened (see Section 2.1).
Always select the fastest setting in the
menu or configuration register that
your application allows. You can
naturally combine all measures and
hence produce a marked increase in
the weighing speed of your AT.
7.3 What happens if…?
…the display remains completely
blank?
Possible causes are:
- no power line voltage
- power cable not connected
- wrong power line voltage
Check and if necessary rectify the
specified error sources. If the balance
does not function after switching on
with the «On/Off» key, contact
METTLER TOLEDO service.