Specifications
28
Batching and Filling Software
Models Q.bATCHcompact
Resolution Scales – 1 000 000d/100 000e (approved)
Flow Meters – as per resolutions of attached device
Dimensions (W×D×H, mm) 610×381×610
Display Options 4 Line Backlit LCD
Vacuum florescent, upper: 7-digit, 7-segment,
13 mm; lower: 16-char., 5× 7 dot matrix, 6 mm
Housing
Panel, stainless steel harsh
Keypad
QWERTY K/Board
Protection
IP65
Interfaces
Ethernet with internal webserver,
RS232c, RS422/485, optional:
ControlNet/Ethernet IP, Profibus
®
DP
Power
Autosensing 110–240V AC @50/60Hz
Applications
Sequential and simultaneous, Multi-Scale and/or
Multi-Flow Meter measurement filling, dosing, blending
and batching applications. Configurable material
feed, event and timer recipe steps. Recipe management,
storage, editing and production, consumption and batch
reports. Matroller resident batch executive with a max.
of 15 outputs and 4 inputs.
Accessories
Analog, Dual analog, Analog reduced excitation,
Dual analog reduced excitation, IDNet, POWERCELL
®
,
PCJagBASIC EDITOR, Flow meters (pulsed output only),
Multifunction I/O, Controlnet/Ethernet IP, Profibus
®
DP
Number of attachable platforms
Up to 12 devices; 1–4 scales or 1–12 flow meters;
additional I/O (avail. on request)
METTLER TOLEDO Batching/Filling Software
Less Time and Money
on the Project
Q.bATCHcompact
A fully configurable pre-engineered batch
controller. The perfect manufacturing tool for
manufacturers who
don't want to be "pro-
grammer" dependent,
or for whom speed
to market is a must.
Satisfying the needs of
small to medium
batch or filling applications,
the Q.bATCHcompact
takes full advantage
of the em
bedded features of the Q.iMPACT
Lite and Compact matrollers, and installs in
days not weeks
When speed to Market is a Must
Batching, blending, formulation and
fillings systems traditionally take
time to move through the four clas-
sical stages of a project – design,
installation, calibration &
commis-
sioning. This frequently slows down
a market entry,
or an adaptation to
a changing market. Trying to navi-
gate these stages impacts many
startup
ROR (rate of return)
calculations negatively.
Enough is enough! Things have
changed for small to medium batch-
ing or filling operations. A pre-engi-
neered, off-the-shelf system specifi-
cally designed to accelerate the de-
sign and startup phase is now
available. In addition, this system
utilizes mathematical, adaptive, real
time modeling to speed up the cali-
bration and commissioning phase.
The result...
The old adage “Time is Money” has never resonated louder than it does today amongst
manufacturing communities. Speed to market is critical!
www.mt.com/batching
www.mt.com/filling