Specifications

66
Floor/Pit Scales
K Line
For highest accuracy
This hybrid design combining electromag-
netic force compensation cell with lever
system, the K Line of pit and floor scales
offers maximum accuracy with up to
6000e/7500e. These scales set the high-
est standards for all aspects of industrial
weighing. Their linearity, repeatability and
corner load are all that could be desired,
and impressive (IP66/67) protection plus
the option of stainless steel make them
very versatile.
Scale Material Stainless steel, hot galvanized
(depending on scale model)
Load Plate Material
Stainless steel, hot galvanized
(depending on scale model)
Protection
IP66/67
Scale Interface
IDNet
Accessories
Load plates; Pit frames; Ramps; IDNet cable accessories
Hazardous area approval K: EU/ATEX: Cat 3GD
Kx-T4: EU:ATEX: Cat 2GD, USA/FM; Canada/CSA;
Japan/TIIS; Russia /GOST-R; China/NEPSI
Suitable indicators Safe Area: IND4x9, IND560, IND690, ID30, IND780
Cat 3GD: IND690xx, IND4x9xx
Cat 2GD: ID7sx
Designed to fit your application,
industry and environment
METTLER TOLEDO Floor/Pit Scales
Resolution e
6000e/7500e SR*
Capacity
300kg 600kg 1500kg 3000kg
Platform Size (mm)
800×800 2g** 10g**
800×1000 2g** 10g**
1000×1250 10g** 20g**
1250×1500 20g** 50g**
1500×1500 20g** 50g**
Optional 3×3000e Multi Interval, up to 300 000d
* SR = Single Range
** Standard setting ex-works
300–3000kg
All our analogue weighing platforms can be combined with any METTLER TOLEDO
weighing terminal to fit your application. For higher accuracy and more flexi-
bility, our K- and M-platforms use the IDNet interface to communicate the weighing
result. Minimize your installation times, increase your flexibility and make the
most of the advantages of a digital IDNet scale interface. Simply connect and weigh!