Specifications

73
Model DO
Resolution
Approved: 1× 3000e Single Range
Non-approved: up to 15 000d
(depending on the application/vibrations)
Capacity (kg)
300
Readability (g)
Approved: 100
Dimensions (mm)
Weighing rail insert length: 600, 800, 1000
Scale Material
Hot galvanized
Protection
IP65
Interfaces
Scale interface: IDNet, analog
Accessories
IDNet cable accessories
Suitable indicators
IND4x5, IND4x9, IND560, IND690, ID30, ...
Model DSO
Resolution Approved: 1× 3000e Single Range
Non-approved: up to 15 000d
(depending on the application/vibrations)
Capacity (kg)
150, 300
Readability (g)
Approved: 50, 100 (depending on the capacity)
Dimensions (mm) Weighing rail insert length: 200, 300, 400;
Flexible adaptation plate
Scale Material
Hot galvanized
Protection
IP65
Interfaces
Scale interface: analog
Suitable indicators
IND4x5, IND4x9, IND560, IND690, IND780, ...
Resolution Approved: 1× 3000e Single Range
Capacity (kg)
150
Readability (g)
Approved: 50
Dimensions (mm)
Plate size: 600×400
Scale Material
Finish on visible surfaces: Stainless steel
(1.4301/AISI 304) / Finish hinged plate
support/internal frame: Hot galvanized
Protection
IP67
Interfaces
Scale interface: IDNet, analog
Accessories
Dowel installation kit; Screw-through mounting
kit; Gallows with meat hook; Bench stand;
IDNet cable accessories
Suitable indicators
IND4x5, IND4x9, IND560, IND690, IND780, ...
DO DSO
www.mt.com/overhead-monorail www.mt.com/wall-scale
METTLER TOLEDO Special Scales
DO/DSO
Overhead/Monorail Scales
The DO300 overhead rail scale is equipped
with two strain gauge weighing cells and is
designed for weighing up to 300 kg. The rug-
ged and torsionally rigid unit is fixed below
the mounting support and thus ensures com-
pact installation in very small spaces.
DSO scales can be easily integrated regard-
less of the type of rail system used, as both
versions offer an universal adaption plate
which can be installed above and around
the rail.
DW
Wall Scale
The space-saving, compact wall scale
is the ideal solution for weighing part
loads or half-carcasses. The hinged plate,
casing and gallows hook are made from
stainless steel to ensure compliance with
stringent hygiene regulations.
Depending on the requirements of the in-
stallation wall, mounting kits are available.
A bench stand is also available and an
optional meat hook can be secured vertically
in two different positions.
150kg
150–300kg