Specifications

83
Dimensions (W×D×H) ISB05/15: 110×115×35mm
ISB05x/15x: 150×195×140mm
Construction ISB05/15:
Covers are ABS plastic
ISB05x/15x: Cast aluminum alloy with
no more than 6% magnesium by weight
Operating Voltages
1–5V DC (ISB05), 5–15V DC (ISB15)
Environment ISB05/15:
Dry, non-hazardous areas only
ISB05x/15x:
Washdown,
within hazardous areas
Haz. area approval
NMi, NTEP, KEMA, FM, CSA
Housing
NEMA Type 7/9
Signal processing
Analog
Accessories
Kit with two 3/4” NPT conduit sealing
fittings, Kit with two 3/4” NPT to
20mm thread adapters
Active Prevention
ISB(x)
Intrinsic Safety Barrier
The ISB (Intrinsic Safety Barrier) is designed specifically for use in
high accuracy/high resolution weighing applications. When in-
stalled in a load cell cable between a terminal in a safe area and analog
load cells in a hazardous area, the ISB limits the energy delivered into
the hazardous area to prevent ignition of a potentially explosive atmos-
phere. The ISB05 and ISB15 are used for general purpose, safe area use,
approved as [EEx ia] IIC in Europe and AIS/I,II,III/1/ ABCDEFG in the U.S..
The ISB5X and ISB15X feature NEMA Type 7/9 flameproof enclosures for
hazardous area use, approved as EEx d IIB+H2 [ia] IIC T6 in Europe
and XP/I/1/CD T6; DIP/II,III/1/EFG T6 in the U.S.
Resolution Full scale resolution of A/D 500,000
counts per cell
Dimensions
309.8×220×88.7mm (W×D×H)
Protection
NEMA 4X enclosure
Power
Supplied from hosting terminal’s
data connection
Stay flexible
InSite
®
Terminal Configuration Tool
Software based tool used to configure (on- or off-line) terminals. Save
configurations, load them to the target device and configure templates.
www.mt.com/industrial
METTLER TOLEDO Accessories
Fast Failure Detection
RAAD Box
Smart Sensor Network
With the RAAD Box
, conventional strain gauge load cell
systems can be transformed into advanced sensor networks.
Instead of analyzing the combined signal from every load cell in
the system, the RAAD Box embeds intelligence into each indi-
vidual load cell, enabling you to analyze your system at the lowest
level. Failures can be detected imme
diately, guarding you against
costly downtime or product waste.
Measuring Data at the Click of a Mouse
BalanceLink
Communication Software
BalanceLink allows data communication between a variety of METTLER
TOLEDO instruments and your application program, including MS Word
,
MS Excel
, MS Access
and many more.
Properties:
– Data transfer at the touch of a button – at a particular time
or at defined intervals
– Date and time stamp for each measurement result
– Data can be automatically written to a text file
– Customer-specific formulas for the automatic conversion
of measured values
– 5 languages: German, English, French, Spanish, Italian
– Online help
Supported devices
– METTLER TOLEDO balances (requirement of SICS instruction set)
– Balances from third-party manufacturers (open interfaces)
– Analytical instruments and moisture detection devices
Specifications InSite
®
Configuration Tool
Operating Systems
Windows
®
XP
Required Software
NET Framework 1.1 or later
CPU Speed
Min. 500MHz
Memory
Min. 128MB, 256MB or greater recomm.
Hard Disk
15MB of free space minimum
Display resolution
VGA or higher resolution monitor;
800×600 resolution recommended
Supported Products
IND130/1.0, IND560/1.01, IND780