User manual
OperationIND445
13User manual 22013194B 05/08
Note If a tare weight had already been saved under the selected memory location, the mes-
sage rEPLACE appears in the display.
• To save the new tare weight, press . The old tare weight is overwritten.
• To abort the save process, press . The previous memory location assignment
remains valid.
Calling up tare weights
➜ Enter the number of the memory location with the required tare weight (factory set-
ting: 1 ... 40) and press briefly.
The selected tare value is loaded from the memory and appears briefly in the dis-
play. The scale tares with the selected tare value and then displays the current net
weight.
Clearing saved tare weights
1. Enter the number of the memory location with the tare weight to be cleared (factory
setting: 1 ... 40) and press briefly.
The saved tare value is displayed.
2. Press within 2 seconds.
CLEArED briefly appears in the display. The saved tare value is cleared.
2.4.6 Chain tare
Prerequisite
The tare function CHAIn.tr is activated in the menu.
With this function it is possible to tare several times if, for example, cardboard is
placed between individual layers in a container.
1. Place the first container or packaging material on the scale and press .
The packaging weight is automatically saved as the tare weight, the zero display
and the symbol NET appear.
2. Weigh the weighing sample and read/print out the result.
3. Place the second container or packaging material on the scale and press
again.
The total weight on the scale is saved as the new tare weight. The zero display
appears.
4. Weigh the weighing sample in the second container and read/print the result.
5. Repeat the last two steps for other containers.
2.5 Displaying the capacity available
The scale has a graphic display of the scale capacity available. The bar indicates how
many per cent of the scale capacity is already occupied and what capacity is still
available. In the example, approx. 65 % of the scale capacity is occupied.
T
T
T