User manual

OperationIND445
17User manual 22013194B 05/08
2.8.2 Displaying identification
➜ Displaying ID1: Briefly press once.
The number currently assigned to the ID1 appears in the display. If no ID1 was
assigned, no Id appears.
➜ Displaying ID2: Briefly press twice.
The number currently assigned to the ID2 appears in the display. If no ID2 was
assigned, no Id appears.
2.8.3 Clearing identifications
1. Briefly press once to display ID1 or briefly press twice to display ID2.
2. Press for as long as the identification is displayed.
The clearing is briefly confirmed with the message CLEArEd.
2.9 Printing results
If a printer or computer is connected to the scale, the weighing results can be printed
out or sent to a computer.
➜ Press .
The display contents are printed out and transferred to the computer.
2.10 Displaying info
Up to 13 different values to be displayed can be configured in the menu for the key
.
Depending on the configuration in the menu, see Section 4.4.5, the following values
can be stored in any order (for example):
• Net quantity
• Gross weight
• Average piece weight
• Average piece weight, higher resolution
• Counting accuracy
1. Press .
The first value is displayed.
2. Press again.
The next value is displayed.
3. Repeat as often as necessary until the weight display appears again.
Note If is not pressed again within 5 seconds, the scale automatically changes to the
weight display, even if all information has not yet been queried.