User manual

IND445
18
Operation
User manual 22013194B 05/08
2.11 Switching scales
If a second scale or a weighing platform is connected, e. g. via the optional analog
second scale interface, the currently active scale is shown in the display.
The second scale can be operated in exactly the same way as the first scale.
➜ Press .
The display changes from one scale to the other.
Changing the operating
mode of the second
scale
The second scale can be operated as bulk scale (bulk), reference scale (ref) or
auxiliary scale (auxiliary), see Section 4.6. In the factory setting the second scale
operates as bulk scale.
➜ To change the operating mode, keep the key pressed until the new operating
mode appears briefly in the display.
The second scale will now operate in the other operating mode. The setting in the
menu has been changed automatically.
2.12 Accumulating
The terminal IND445 can accumulate weight values or pieces. Individual items can
also be subtracted.
A connected printer offers you the possibility of generating a printout for each individ-
ual item and/or a complete printout. For settings in the menu, see Section 4.4.2.
2.12.1 Accumulating items
1. Place the first item on the scale and press .
The weight value or the number of pieces are saved and, if necessary, printed out.
2. Unload scale.
3. Place the next item on the scale and press again.
The weight value and the number of pieces of the next item are added to those of
the previous one.
4. Unload scale.
5. Repeat steps 3 and 4 for all other items.
2.12.2 Subtracting items
1. Place the item on the scale, press and hold down .
The weight value or the number of pieces are subtracted and, if necessary, printed
out.
2. Unload scale.