User manual

CountingIND445
23User manual 22013194B 05/08
3.6 Reference optimization
3.6.1 Automatic reference optimization
rEF.OPt -> AUtO must be set in the menu for this. The symbol Auto Opt appears
in the display.
1. Place the reference parts on the scale and press .
2. Place additional reference parts, max. the same number as for the first reference
determination, on the scale.
The scale automatically optimizes the average piece weight with the larger number
of reference parts.
The rest of the counting process is as described earlier.
Note Reference optimization can be carried out several times. If the parts differ too strongly,
no automatic reference optimization is carried out.
3.6.2 Manual reference optimization
rEF.OPt -> MAnuAL must be set in the menu for this.
1. Place the reference parts on the scale and press .
2. Place additional reference parts, max. the same number as for the first reference
determination, on the scale and press .
The scale optimizes the average piece weight with the larger number of reference
parts.
The rest of the counting process is as described earlier.
Note The reference optimization can be performed several times.
3.7 Counting with automatic reference determination
Prerequisite
A-SMPL ON is set in the menu.
Place the number of pieces displayed above the key into the container.
The scale automatically determines the average piece weight and then shows the
quantity.
The rest of the counting process is as described earlier.
3.8 Counting with a known average piece weight
Enter the known average piece weight via the numerical keypad and press .
The scale changes the unit to PCS.
The rest of the counting process is as described earlier.