User manual
IND445
42
Settings in the menu
User manual 22013194B 05/08
4.6 Configuring interfaces (COMMUNICATION)
4.6.1 COM1/COM2 -> MODE – operating mode of the serial interface
4.6.2 COM1/COM2 -> PRINTER – settings for protocol printout
This menu item only appears if the mode "Print" or "A.Print" is selected.
Print Manual data output to the printer with
A.Print Automatic output of stable results to the printer (e.g. for series weighing operations)
CONtINU Ongoing output of all weight values via the interface
dIALOG Bi-directional communication via MT-SICS commands, control of the scale via PC
CONt.OLd As per CONtINU, see above, but with 2 fixed blanks in front of the unit (compatible
with Spider 1/2/3)
dIAL.OLd As per dIALOG, see above, but with 2 fixed blanks in front of the unit (compatible
with Spider 1/2/3)
dt-b DigiTOL-compatible format.
GROSS
• Transfer of the gross weight, identified with "B"
tArE
• Transfer of the tare weight
nEt
• Transfer of the net weight
dt-G As per dt-b, see above, gross weight identified with "G"
COnt-Wt TOLEDO Continuous mode
COnt-Ct TOLEDO Continuous mode, transfer of the number of pieces
bArc.rd For connecting a serial barcode reader for reading in from ID1 and ID2 and interface
commands (automatically activates the 5 V power supply on pin 9)
2nd.dISP For connecting a second display (automatically activates the 5-V voltage supply at
Pin 9)
rEF Data transfer from the reference scale (automatic switchover)
bULK Data transfer from the quantity scale (automatic switchover)
AuXILIA Data transfer from the reference or quantity scale (manual switchover)
InSt.Prn Immediate manual data output to the printer with (not certifiable)
tYPE Select the printer type
ASCII
• ASCII printer, e.g. Sprinter 1
LabEL
• Label printer, capable of printing graphics
tEmPLat Selecting protocol printout
StdArd
• Standard printout
tEmPLt1
• Printout in accordance with Template 1
tEmPLt2
• Printout in accordance with Template 2