User manual

IntroductionIND445
5User manual 22013194B 05/08
1 Introduction
1.1 Safety instructions
DANGER!
Electric shock hazard!
Always pull out the mains plug before any work on the device.
DANGER!
Electric shock hazard if the mains cable is damaged!
Check the mains cable for damage regularly and replace it immediately if it is dam-
aged.
On the rear side of the device, maintain a clearance of at least 1.2" (3 cm) in order
to prevent the mains cable bending too much.
CAUTION!
On no account open the device!
The warranty is void if this stipulation is ignored. The device may only be opened by
authorized persons.
Call METTLER TOLEDO Service.
CAUTION!
Do not use IND445 in hazardous areas!
Our product range includes special devices for hazardous areas.
CAUTION!
Terminals with protection level IP65 are dust-tight and hose-proof to EN 60529. They
are suitable for use in dusty environment and brief contact with liquids. Ensure that the
terminal is dried off again after coming into contact with liquid.
Even with degree of protection IP65 the terminal should not be used in environments
in which there is a risk of corrosion.
Do not flood the terminal or submerge it in liquid.