Technical data

Chapter 4: Programming and Calibration Using the Web Server
System Requirements
(9/00) 4-1
4 Programming and Calibration Using the
Web Server
System Requirements
The JAGXTREME terminal has an embedded web server, allowing you to program
and calibrate a scale from anywhere within a facility – and from anywhere in the
world – via the Internet. To use this feature, you must have the following:
• A connection to the JAGXTREME terminal via modem or Ethernet with the
appropriate communications protocols configured. A crossover cable is
required for a direct connection via Ethernet.
• Internet Explorer 4.0 or higher revision.
You may find it helpful to review the information provided in Chapter 3 of this
manual to better understand the various program blocks and options for
configuring the scale.
Navigation Bar Menu
When using the embedded web server, a series of web pages will guide you
through the setup and calibration process. You will begin at the Home Page. All
JAGXTREME web pages include a Navigation Bar at the left side of the screen.
The information on the following pages describes the various icons that appear in
the Navigation Bar. Clicking on these icons will you lead you to the various
screens that will guide you through the setup and configuration process.