Technical data

METTLER TOLEDO JAGXTREME Terminal Technical Manual
(9/00) 6-2
• ESCAPE (ESC) exits an operating mode, exits a sub-block programming level to the
level above, or recalls previously stored data.
• TARE (T) performs a pushbutton tare function if enabled in setup.
• CLEAR (C) clears a tare value and returns the scale to gross mode. The CLEAR key
also functions as a backspace/delete when entering data from the keypad.
• ENTER acknowledges a prompt, opens program blocks and sub-blocks, and
accepts data entered from the keypad. ENTER also initiates a demand print output.
Alphabetic and Special
Character Entry
1. Press the numeric key with the desired letter. The number is displayed.
2. Press SELECT until the desired letter appears.
3. Continue to the key containing the character you want and repeat steps 1 and 2.
4. When you have finished entering your response, press ENTER.
Using a PC Keyboard
You can attach a keyboard to the JAGXTREME terminal for quicker alphanumeric data
entry and to access other characters and lowercase letters. The JAGXTREME Controller
board has a PC keyboard controller and plug-in connector to support a keyboard.
The PC keyboard and JAGXTREME keypad send the same data to the terminal and
operate concurrently. For example, the numeric keys on the keyboard and keypad have
the same ASCII value and send the same numeric data. The following shows other
keystroke equivalents for keyboard and keypad.
Keyboard Keypad
F5 ZERO
F6 FUNCTION
F7 SELECT
F8 CLEAR
F9 TARE
F10 MEMORY
ESC ESCAPE
ENTER ENTER
The backspace key on the PC keyboard functions as a backspace/delete key when
entering data. The keyboard supports NUM LOCK and CAPS LOCK.