Operating instructions

IES Corporation, 2324 SE 11
th
Ave, Portland, OR 97214
PHONE: [phone] FAX: [phone] e-mail: [e-mail]
108
PC2000, PC4000, PC4400 -- Guides Made By IES Corp.
Mettler no longer sells the former 41189 part; upper and lower guide for the popular PC-
2000/4000/4400 series of instruments. However, these instruments can be salvaged when
guides are broken. IES makes a replacement guide that can return the unit to full
performance operation.
An exchange program allows technicians to replace damaged 41189s in the field. Under this
program, IES supplies remanufactured 41189 assemblies in exchange for defective
components. The damaged components are refurbished with new flexible bearings made by
IES.
Because IES has a limited number of rebuildable cores, all parts are sold with the
understanding that the defective parts being removed from instruments will be returned to
IES. IES does not sell 41189 components on any non-exchange basis. IES can provide parts
prior to receiving the recyclable component on a limited basis.
Cost of the IES 41189 component is $115.
IES manufacturers 41189 components using precision alignment fixtures. Dimensions,
parallelism and flatness are controlled to precision tolerances. Repaired instruments can meet
original accuracy performance requirements when properly installed.
IES guarantees that parts meet IES manufacturing specifications, no other warranty is
expressed or implied. It is the responsibility of the installation technician to install
components with skill and craftsmanship. IES recommends installation in accordance with
Mettler Service Manuals
.