Operating instructions

Settings in the master mode
18 Operating instructions 22012836B 09/08
IND690-Fill
TOTALIZING Switch automatic totalizing on or off
If TOTALIZING ON is set, the dispensings to be totalized can be selected.
Factory setting: TOTALIZING OFF
CORRECT DISPENSINGS Only totalize dispensings within the tolerances.
Cancelled dispensings can be added to the total sum with the SUM key in the
CONTINUE WITH START state.
ALL DISPENSINGS Totalize all dispensings.
STATUS INDICATOR Set display of dispensing state on IND690-Fill
WITH DELTATRAC The dispensing state is displayed with text, a 3-digit code and the DeltaTrac, see
section
1.6.1 (factory setting).
WITHOUT DELTATRAC The dispensing process is displayed with texts and a 3-digit code.
WITH BIG WEIGHT During the dispensing process the BIG WEIGHT DISPLAY weight display is switched
on. Dispensing states such as READY FOR DISPENSING or DISPENSING OKAY
continue to be displayed, and the display switches over to the normal weight
display for this purpose.
The following possibilities are also available for all settings:
• NOT ENLARGED (factory setting):
When the weighing platform is ready for dispensing, the display shows READY
FOR DISPENSING.
• ENLARGED:
When a target memory has been recalled, the memory designation appears in
the display in the ready for dispensing state.
For manually entered dispensing parameters, READY FOR DISPENSING appears.
PASSWORD BLOCK Switch password block on or off
Protect SUM, N and LIMIT keys with the personal code which also protects the
master mode, see "Master mode" section in the operating instructions for the
IND690-Base weighing terminal.
Factory setting: PASSWORD BLOCK OFF
PAC START KEY Switch locking of the START key on or off
If PAC START KEY OFF is set, the START key is locked and the dispensing process
can only be started via an external switch or a 8-690 relay box. This prevents
double operation with external operating elements (e.g. footswitch or key).
Factory setting: PAC START KEY ON