Operating instructions

Settings in the master mode
Operating instructions 22012836B 09/08 23
IND690-Fill
START TIMER Set delay time between the start of the dispensing process and opening of the
coarse feed
TIME Possible values: 0 … 999 seconds (factory setting: 0)
Comments • When the start timer is activated, the display shows the time remaining.
• The start timer can be interrupted or cancelled with the STOP key.
• If two 8-690 relay boxes are installed, the OUT7 output on the second 8-690
relay box is set to HIGH during the delay time.
This signal can, for example, be used for pregasing when dispensing fruit juices.
END TIMER Set delay time between stabilization of the weighing platform after the end of
dispensing and evaluation of the weighing data
TIME Possible values: 0 … 999 seconds (factory setting: 0)
Comments • When the end timer is activated, the display shows the time remaining.
• The stop timer can be interrupted or cancelled with the STOP key.
• If two 8-690 relay boxes are installed, the OUT6 output on the second 8-690
relay box is set to HIGH during the delay time.
This signal can, for example, be used for regasing when dispensing fruit juices.
PREDISPENSING Set time for predispensing
The fine feed valve is actuated before each opening of the coarse feed. The fine feed
valve can be opened either for a specific period of time or up to a specific weight.
TIME Possible values: 0 … 999 seconds (factory setting: 0)
WEIGHT Weight limit for predispensing
Possible values: 0 ... target weight (factory setting: 0 kg)
Comments • Predispensing can be interrupted or cancelled with the STOP key. When limit 1 is
reached, predispensing is automatically cancelled.
• When predispensing is activated, the display shows the time still remaining.
PRINTING CYCLE Enter number of dispensings after which the dispensing result is automatically
printed or a corresponding data string is transmitted
Possible values: 1 … 99 (factory setting: 1)