Operating instructions

Settings in the master mode
Operating instructions 22012836B 09/08 25
IND690-Fill
RESET PAC Reset all functions to the factory settings
Block Factory setting
APPLICATION above level
AUTOMATIC TARE on
REDISP. CORRECTION on; factor = 0.5; correction threshold = 0
REDISPENSING autom. redispensing; pulse duration 5 s;
pulse pause 5 s
TOTALIZING off
STATUS INDICATOR with DeltaTrac; not enlarged
PASSWORD BLOCK off
PAC START KEY on
OPERATING MODE automatic
MANUAL CORRECTION off
OUTPUT 2 output 2 off
LEARN MODE on; trip factor coarse feed = 0.5;
trip factor fine feed = 0.5
MONITOR DISPENSING off; sensitivity 00 03 10 01 01 01; weighing in
ACKNOWLEDGE on
COARSE FEED coarse
START TIMER 0 s
END TIMER 0 s
PREDISPENSING 0
PRINTING CYCLE 1
SINGLE FEED OPERATION off
OUTPUT 7 impulse on start
ANALOG OUTPUT off
READY PIN INPUT LOW active