Operating instructions

Settings in the master mode
Operating instructions 22012836B 09/08 27
IND690-Fill
2.2.3 Fill quantity
FILL QUANTITY Set fill quantity control during weighing-out
If the gross weight of the filling container drops below a specified value ALARM
VALUE after a dispensing process, output OUT2 on the first 8-690 relay box is set to
HIGH.
The supply vessel is automatically refilled and the display shows REFILL.
When the specified weight value FILL QUANTITY is reached, output OUT2 is set to
LOW.
ALARM VALUE Enter absolute switch-on value of fill quantity control as weight value.
FILL QUANTITY Enter absolute switch-off value of fill quantity control as weight value.
Comments • The next dispensing process can only be started with the START key if output
OUT2 is set to LOW.
• With the STOP key output OUT2 can be manually set to LOW.
• The ALARM VALUE is available in the application block 356, the FILL QUANTITY in
application block 357, see section
3.