Operating instructions

What to do if …?
Operating instructions 22012836B 09/08 39
IND690-Fill
TMAX LESS THAN TMIN • Maximum tare value is less than
minimum tare value
➜ Increase max. tare value and
decrease min. tare value
TOLERANCE INADMISS. • Tolerance too small for weighing
platform or too large for tolerance table
➜ Enter tolerance in permissible range
OVERFILLED • Filling container overfilled ➜ Confirm or correct manually
UNDERFILLED • Filling container underfilled ➜ Confirm or correct manually
CONTINUE WITH START • Filling process interrupted with STOP
key
➜ START key continues dispensing
process, STOP key ends dispensing
process
NO VALUE • 0 was entered for a dispensing
parameter
➜ Enter value greater than 0
NO RELAY BOX-8 • Dispensing process started without
Relay box 8-690 or 4 I/O-690
➜ If dispensing is to be carried out
without relay box 8-690, 4
I/O-690
or ProfibusDP-690, confirm the
message with ENTER.
➜ Otherwise connect Relay box 8-690
or 4
I/O-690 correctly
TIMEOUT RELAY BOX: X • IND690-Fill can no longer access
Relay box-8 because, for example, the
connecting line has been interrupted
➜ Confirm the message with ENTER,
IND690-Fill goes into the basic state
➜ Connection to Relay box-8 re-
established. A new dispensing
process can now be started.
Error / Display Possible causes Remedy