Operating instructions

Dispensing functions
4 Operating instructions 22012836B 09/08
IND690-Fill
1 Dispensing functions
1.1 Documentation
The weighing terminal IND690-… comes supplied with a CD containing all the
documentation on the weighing system IND690.
These operating instructions describe the operation and configuration of the
application software IND690-Fill.
The basic information for working with the weighing terminal IND690-... can be
found in the operating instructions IND690-Base.
1.2 Introduction
With the IND690-Fill you can dispense liquid, pasty, powdery or grainy weighing
samples in accordance with a specified target weight.
With the function keys the IND690-Fill makes the following functions available:
➜ Select the function by pressing the function key.
Example
➜ Press the N key.
Then enter the start and stop value of the item counter manually with the keypad.
Note
When PASSWORD BLOCK ON is set in the master mode, a personal code must be
entered after pressing the N key.
When the function keys are otherwise allocated
➜ Press the cursor keys < or > repeatedly until the function key assignment shown
above appears.
CAUTION
Danger of injury when pressing keys which start and stop the dispensing system or
control the valves!
➜ Before pressing these keys, make sure that no one is in the area of moving
system parts.
N SUM MAN LIMIT STOP START
Enter item
counter
Display and
print total sum
Manual
redispensing
Enter and print
dispensing
parameters
Interrupt or
cancel
dispensing
process
Start dispens-
ing process
and print
results of dis
-
pensing after
the dispens
-
ing process is
completed